Strong induction of phytochelatin synthesis by zinc in marine green alga, Dunaliella tertiolecta

Synthesis of phytochelatins (PCs), heavy-metal-sequestering peptides, in the marine green alga, Dunaliella tertiolecta, was evaluated under various conditions of exposure to heavy metals. To investigate the effect of heavy metals on both PC synthesis and their upstream biosynthetic reactions, an ion-pair-HPLC system was developed in this study, by which PCs and their biosynthetic intermediates, cysteine (Cys), gamma-glutamylcysteine (gammaEC) and glutathione (GSH), could be determined simultaneously with high sensitivity. When the cells were exposed to Zn2+, the level of PCs was maximal at 200 microM and significantly higher than that obtained after exposure to 400 microM Cd2+, which is the strongest inducer of PC synthesis in higher plants in vivo and in vitro as well as in microalgae. The predominant PC subtype was PC4, followed by PC3 and PC5, whereas PC2, which is generally abundant in higher plants, has the lowest level among PC2 to PC5. These results suggest that the characteristics of PC synthase in D. tertiolecta including the requirement of heavy metals for its catalysis and substrate specificity towards GSH and PC(n) are considerably different from those in higher plants and other algae. While PC synthesis proceeded in the heavy-metal-treated cells, the level of GSH did not appreciably change. To maintain the same size of the GSH pool, GSH must be newly synthesized to balance the amount consumed for PC synthesis.     

Usefulness of Permanent Power Fuse in Control Centers with Molded Case Circuit Breakers

The increase in electric power consumption in industry has led to the development of modern distribution systems such as control centers having high kVA ratings and high prospective fault current. In such a situation, the improvement of the system usefulness such as reliability and cost effectiveness is the essential requirement. An index is presented to evaluate the system usefulness using the cost effectiveness for fault protection in a system of given bank kVA. The index is estimated on four different system structures of control centers, including one which utilizes Permanent Power Fuses (PPF). It is presented that the PPF combined with molded case circuit breaker in main circuit effectively improves the cost effectiveness in control centers with high fault current. Operating principles of the PPF and the control center utilizing the PPF are briefly outlined.     

Vacuum seal for a rectangular flange

A new vacuum seal for a rectangular flange used in r.f. equipments, was developed. The vacuum seal consists of a recess with a flat surface, machined into a rectangular flange, a rectangular metal gasket with a raised projection on one face, and a mating flange with a recess and raised projection. No leak greater than 1 × 10⁻¹⁰ Pa m³/s was found in leak tests, before and after baking cycles (100 °C, 12 h).     

An energy trading system with consideration of CO2 emissions

Abatement of CO₂ emission is one of the most important issues in the 21st century regarding preservation of the earth environment. This paper addresses a utility operations planning problem for distributed energy management systems (DEMSs), where we are to obtain optimal plans that minimize both costs and CO₂ emissions. A DEMS consists of multiple entities that seek their own economic profits. In this paper, we give a mathematical formulation of the utility operations planning problem for each entity, and propose an energy trading market, which utlizes a multi‐attribute auction protocol in order to deal with both a price and a CO₂ emission rate. Experimental results show that collaboration among entities through the market provides a more profitable plan for each entity and abatement of CO₂ emission is also achieved. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(4): 54–63, 2008; Published online in Wiley InterScience ( www.interscience.wiley. com ). DOI 10.1002/eej.20418     

High-efficiency hot-electron transport in GaInAs/InP hot electron transistor grown by OMVPE

Improved characteristics of the GaInAs/InP hot electron transistor (HET) fabricated by organo-metallic vapour phase epitaxy (OMVPE) are reported. The common-emitter current gain was 8 for the base thickness of 40 nm at 77 K. This result shows a promising potential for the heterostructure material system of GaInAs/InP for high-speed ballistic electron devices.<>     

GaInAs-GaInNAs-GaInAs intermediate layer structure for longwavelength lasers

Proposes two new structures, the GaInAs-GaInNAs intermediate layer (IML) and the GaInN_xAs graded wells, which show better optical properties than the commonly used GaInNAs-GaAs rectangular quantum-wells. A 1240-nm emitting IML laser has been achieved with a low-threshold current density (200 A/cm²/well) and a relatively high characteristic temperature (T_o=100 K). The IML structure is very promising for long wavelength GaAs-based laser applications     

Fabrication of Three-Dimensional Micro Photonic Crystals of Resin-Incorporating TiO2 Particles and their Terahertz Wave Properties

Three-dimensional (3D) photonic crystals with a diamond structure made from 40 vol% TiO₂–acrylate dielectric composites were formed by means of a CAD/CAM micro-stereolithography system. The lattice constant of the diamond unit cell was 500 μm and the forming accuracy was 10 μm. The photonic band gap in the Γ–X 〈100〉 direction measured by terahertz-time-domain spectroscopy appeared at 280–360 GHz, which agreed fairly well with the band gap calculated by the plane wave expansion method.     

A 250-Mb/s/pin, 1-Gb double-data-rate SDRAM with a bidirectionaldelay and an interbank shared redundancy scheme

This paper describes three circuit technologies indispensable for high-bandwidth multibank DRAM's. (1) A clock generator based on a bidirectional delay (BDD) eliminates the output skew. The BDD measures the cycle time as the quantity charged or discharged of an analog quantity, and replicates it in the next cycle. This achieves a 0.18-mm ², two-cycle-lock clock generator operating from 25 to 167 MHz with a 30-ps resolution. (2) A quad-coupled receiver eliminates the internal skew caused by the difference between a rise input and a fall input by 40%. (3) An interbank shared redundancy scheme (ISR) with a variable unit redundancy (VUR) efficiently increases yield in multibank DRAM's. The ISR allows redundancy match circuits to be shared with two or more banks. The VUR allows the number of units replaced to be variable. These circuit technologies achieved a 250-Mb/s/pin, 8-bank, 1-Gb double-data-rate synchronous DRAM     

Development of a new seminested PCR method for detection of Legionella species and its application to surveillance of legionellae in hospital cooling tower water

The presence of PCR inhibitors in water samples is well known and contributes to the fact that a practical PCR assay has not been developed for legionella surveillance. In this study, we devised a new seminested PCR assay for detection of Legionella spp. in water samples as a means of overriding the PCR inhibitors without loss of sensitivity. The seminested PCR assay utilized primers to amplify the 16S rRNA gene (LEG primers) of 39 Legionella spp. The assay was specific to legionellae, and the sensitivity was 1 fg of extracted Legionella DNA in laboratory examination. To evaluate the feasibility and sensitivity of the PCR assay in identifying the presence of legionellae, it was used to survey Legionella contamination in the water of 49 cooling towers of 32 hospitals. A commercially available EnviroAmp Legionella kit and a culture method were also used in the survey for comparison with the seminested PCR assay. The detection rates of legionellae in the samples were 91.8% (45 of 49) by the PCR assay and 79.5% (39 of 49) by the culture method. The EnviroAmp kit revealed that 30.6% of the water samples (15 of 49) contained inhibitors of the PCR amplification. However, the seminested PCR assay could produce the Legionella-specific DNA bands in 14 of the 15 samples. Although 8 of the 14 samples were positive in the first-step PCR, 6 of the 14 samples became positive in the second-step PCR. These results suggest that the effect of PCR inhibitors in samples, if any, can be reduced because of the dilution of the sample in the second-step PCR and that sensitivity of detection can be increased by the second-step PCR. Thus, the seminested PCR assay with LEG primers to amplify the 16S rRNA gene of 39 Legionella spp. was a practical and sensitive method to detect Legionella spp. in water samples.